
Light-Meters
PR 200-X is a combined lux and UV-A meter, specially designed for control measurements when making NDT tests but naturally also very useful for other type of measurements of illuminance and UV-A radiation, in the field as well as in the laboratory. Fully compilant with ISO 3059.

Digital Luxmeter
The Digital Luxmeter is a small, handy and extremely easy-to-use instrument for accurate measurement of illuminance over a range of 0.1-200,000 lux. With both automatic zeroing and on/off switch, the only controls needed are a four-position range selection switch and a hold button for retaining the display value.

14A Centrifuge Tube
Centrifuge tubes and stand to measure settling volume concentration of magnetic powders.

Pie Gauge
Magnetic field indicators for measuring magnetic field strength and direction

MTU Test Block
It is used to check the sensitivity of magnetic particle materials, assess material degradation and assess bath contamination.

Tool Steel Ring
It is a magnetic particle test piece with pre-drilled holes to simulate subsurface discontinuities. It offers a reliable method of verifying magnetic particle system performance when actual test parts with discontinuities are not available.

Test Bar
Test bar contains coarse and fine surface and subsurface defects in both directions. Meets or exceeds most industrial and military standards for artificial test specimens.

QQI Test Pieces
QQI's are also used to balance multi-directional fields and to increase productivity by minimizing magnetizing shots. The QQI indicator shims are packaged in sets of five.

Magnetic Field Indicator
MG-25 Magnetic Field Indicator is for general purpose use as may be required in various demagnetization specifications. The field indicators are available in non-calibrated and calibrated models.

UV Goggle
Protects eyes against the harmful effects when making NDT tests.

UV Goggle
Protects eyes against the harmful effects when making NDT tests.