UV LED (Black Light) Inspection Lighting
UV LED lamps are used in Non-Destructive Testing (NDT) to inspect the surface for cracks inspection in Magnetic Particle Inspection (MPI) and Fluorescent Penetrant Inspection (FPI).
PROMAG manufactures a range of mains and battery-powered, hand-held / portable UV LED lamps, torches UV LED, and overhead UV LED for different NDT applications to meet the demands of the general industry as well as the aerospace industry.
Our UV LED lamps are tested and complied with the requirements of ASTM E3022, and some of products also compliance with Rolls-Royce RRES 90061 and NADCAP standard.
PROMAG UV Inspection Applications in different fields
Non-destructive Testing (NDT)
Quality Assurance supervisors and NDT technicians can perform their fluorescent penetrant testing and magnetic particle inspection with confidence by using PROMAG’s UV LED lights either in-house or on the field at extremely tough environments. All PROMAG UV LED lights for nondestructive testing (NDT) utilize a peak wavelength of 365nm or near all. PROMAG’s UV lights comply with standards and requirements as below:
- ASTM E1444
- ASTM E1417
- ASTM E3022-18
- ISO 3059-12
- Rolls-Royce RRES 90061
Lab. and clean room
To detect and reveal previously invisible soils and contamination where disease-causing bacteria and viruses can breed. It is a state-of-the-art method for verifying and improving cleanliness and sanitation in the most important areas of your facilities. PROMAG UV LED lamps is widely used by the Lab. and clean room of office, factory, hospitality, health care, food service and government agencies. PROMAG UV LED lights can inspect particles as small as 30μm that are not visible to the human eye and prevent contamination.
- After cleaning machined castings
By inspecting the cleaned parts with PROMAG Ultra Violet (UV) light, you will detect contamination that is not possible to see with the human eye.
- Prior to assembly in Lab. and clean room
It is of utter importance that the parts are clean prior to entering the assembly. Illuminating the parts with PROMAG UV light prior to entering the clean room decreases the risk of contamination.
- For Hygiene & Sanitation reason
Detect urine and other body fluids, food stains, bacterial growths, mold growths, food spoilage, rodent contamination, and other unsanitary conditions.
Leak Testing & Leak Detection
To detect leakage not visible to the human eye and identify leakage at an early stage. A wide selection of PROMAG UV LED lights can be used in combination with PMG-fluorescent dye to perform leak detection tests. In order to detect fluid leaks and their sources quickly, PROMAG UV LED lights can be used together with PMG-fluorescent tracer, which is the additives. This method is used by most manufacturers of petrol and diesel vehicle engines.
Gem & Mineral Inspection
The fluorescence of gems and gemstones is a result of UV radiation absorbed by the impurities or structural flaws of the stones. Detecting alternations and restoring cultural treasures, PROMAG UV LED lights have been used by gemologists, jewelers and hobbyists alike to identify the correct minerals either at a work environment or out in the open.
Not only paintings can be examined with UV, but also pieces of art made of marble, jade, and ivory. Some minerals have the ability to temporarily absorb a small amount of light and release it at a different wavelength. This change in wavelength causes a temporary color change of the mineral, making it visible to the naked eye.
Art Conservation & Examination
To Inspect and verify currency, passports and security documents, stamps, antiques, art and minerals. Detects watermarks, stains and imperfections.
PROMAG UV LED lights can be used in detecting alternations and restoring cultural treasures in order to identify the authenticity of works of art or to inspect damaged or repaired paintings. Not only paintings can be examined with PROMAG UV LED lights, but also pieces of art made of marble, jade, and ivory.
Forensic & Security inspection
Many difficult crimes are solved with the help of PROMAG UV LED light technology. Law enforcement officials, crime laboratories, police CSI teams and forensic professionals around the world can rely on PROMAG UV LED Light products for a wide array of crime scene investigations (criminal investigations) and applications.
Curing & Coating
UV curing is used in many industries including automotive, electronics, telecommunications, graphic arts, converting and metal, glass and plastic decorating. PROMAG UV LED lights is suitable to be used and offer short curing times to handling strength, low heat generation and energy consumption.
- Curing using
Curing with PROMAG high-intensity UV light is used to instantly dry inks, coatings, and adhesives. The process is based on a photochemical reaction when liquid monomers and oligomers are mixed with photoinitiators and exposed to UV light.
- Curing Silicon at low temperature
Many silicone products are cured using PROMAG UV light for electronic display applications. During such process the curing time must be very short and the temperature as low as possible.
- UV inspection of coatings on PCBs
Most PCBs manufactured are sealed with coating for moisture protection and water protection. So it is very significant that the coating is applied in a correct way on the PCB covering the components it is intended to. Some components are crucial to cover, others must not be covered. Inspecting the PCB with PROMAG UV lights ensure that the coating has been applied correctly.
Agriculture / Pest Control
PROMAG UV LED lights offer a wide range of Ultraviolet lamps for detecting mold, pest, and rodent contamination in the agricultural industry, and are also used for the detection of cancerous chemicals such as aflatoxins and infectious diseases on citrus fruits.
Stationary UV Lamps
The overhead UV LED lamp provides a very wide area of coverage, rugged housing, and impact resistant metal construction.
The first overhead UV LED lamp to guarantee an IP67 dustproof and waterproof, digital intensity display, and comprehensive ability.
ALPHA UV LED lamp is special designed for remote controlled use on the NDT market. Modular stationery UV LED system that allows you to design the desired covered area by mounting together multiple units.
Hand-Held UV Lamps
The VICTORY has 4 UV LEDs with 1 white light, and various accessories to option, such as 3.0 Ah Bosch battery / Shoulder Strap / Phone Holder. The series is battery and mains powered, which is re-charged by a Bosch 12v battery charger, these are available from most hardware stores, making it easy to buy replacement/extra batteries and chargers if required.
Compact and super lightweight structure makes it easy carry. Hand-held, re-chargeable UV LED torch to for inspection of small components or hard to reach areas.
Hands-free design frees up your hands and rechargeable design will support you have a reliable, hands-free led headlight to brighten up your environment, leaving you free to work, read, and explore whenever and wherever you want.